V35
Product description
V35 system is a venetian blind based on aluminium slats 35 mm wide. It is designed for internal use in a free-hanging system.
Available V35 system types:
- Tilter – basic version with a wand tilter for slat tilting with a wand.
- Cord – basic version with a cord tilter for slat tilting with cords.
- Side-guiding – basic version with additional cables stabilizing the blind during its lowering and tilting and keeping the slats close to the window pane.
- Crank – the blind is operated with a crank and crank gear. The rotation of the crank regulates slat tilting, and lowering and lifting of the venetian blind.
Product photos
Production technology
Punching distance and length scale 1,2 mtr can be used for for cutting H / B rails and for setting distance of punched holes. It works with punching tools for V13 systems. Cutting tolerance +/-0,5mm. Frame made of aluminium. Required joint assembly on the table.
M600 manual slat forming, punching and cutting machine. Modular construction allows to upgrade this machine to fully automatic if needed.
- Forming, cutting and hole punching in aluminium slats
- Precise setting of slats length and punching stations
- Standard slat width range: 16, 25, 35 i 50 mm
- Quick and easy change between aluminium slats widths without using additional tools
| Slat width | 16, 25, 35, 50 mm |
|---|---|
| Min. length of cut slats | 240 mm |
| Qty of punching stations | 4 |
| Qty of cut off stations | 1 |
| Min. distance from slat edge to first hole | 70 mm |
| Net weight | 140 kg |
| Packing – wood crate (L x W x H) | 3900 x 500 x 730 mm |
M420 is fully automatic slat cutting and punching machine.
- Cutting and punching in one cycle
- Precise setting of slat length and punching stations
- Variable speed: 0 – 100 %
- Standard slat width range : 16, 25, 35, 50 mm, on client’s wish
- Quick and easy change between aluminium slats widths without using additional tools
- Automatic qty of slats and hole division calculation
- Possibility to install threading section
- Easy to operate and maintain
- Side guide hole equipment
- Barcode reader
- Spare parts kit
- Service agreement
| Slats width (on client’s order) | 16, 25, 35, 50 mm |
|---|---|
| Slat length | 210 mm – 3000 mm |
| Qty of punching stations | 4 |
| Qty of cutting stations | 1 |
| Min. distance from slat edge to first hole | 70 mm |
| Max. slat feeding speed | 3 m/sec. |
| Power supply | 230V / 50-60 Hz |
| Installed power | 1,4 kW |
| Net weight | 230 kg |
| Gross weight | 480 kg |
| Packing – wood crate (L x W x H) | 4320 x 700 x 1650 mm |
M420T is fully automatic slats cutting, punching and threading machine.
- Cutting, punching and threading in one cycle
- Precise setting of slat length and punching stations
- Single or double stacking magazines
- Mechanically disengageable punching dies
- Variable speed: 0 – 100 %
- Standard slat width 16, 25, 35, 50 mm
- Quick and easy change between aluminium slats widths without using additional tools
- Automatic qty of slats and hole division calculation
- Easy to operate and maintain
- Side guide hole equipment
- Multi blind cutting station (200 MC – compressed air required (0.6 MPa))
- Barcode leader
- Spare parts kit
- Magazines for woven laddertapes
- Short blinds kit (200 SB – compressed air required (0.6 MPa))
- Service agreement
| Cutting length | 290 mm - 3000 mm (longer optional) |
|---|---|
| Qty of punching stations | 4 |
| Qty of cut off stations | 1 |
| Qty of threading stations | 5 – 8 |
| Min. distance from slat edge to first hole | 75 mm |
| Max. slat feeding speed | 3 m/sec. |
| Power supply | 230V / 50-60 Hz |
| Installed Power | 1,9 kW |
| Net weight | 360 kg |
| Gross weight | 720kg |
| Packing – wood crate (L x W x H) | 4700 x 1120 x 1650 mm |
M4000 is fully automatic slats cutting, punching and threading compact machine of 3rd generation.
- Forming, punching, cutting and threading
- Production with high accuracy
- Compact machine – less space required
- All systems of venetian blinds production
- Numerically controlled length of slats
- Quick and easy change between aluminium slats widths without using additional tools
- Quick setup of blinds dimensions
- Slat coil holder with a constant slat tension
- Automatic slats number calculation
- Possibility to set another blind during machine work
- Diagnostic through service window or Internet modem
- Continuous readout:
- Productivity
- Qty of produced blinds
- Number of cycles per each die
| Machine type | M4000 NCS | M4000 MS |
|---|---|---|
| Number of punching stations | 3 | 3 |
| Number of cutting stations | 1 | 1 |
| Number of threading stations | 5-7 | 5-7 |
| Slat width range | 16, 25, 35, 50 mm | 16, 25, 35, 50 mm |
| Min. slat length | 300 mm – less without threading | 300 mm – less without threading |
| Max. slat length | 3000 mm, 3500 mm, 4000 mm | 3000 mm, 3500 mm, 4000 mm |
| Min. distance from slat edge | 80 mm – less without threading | 80 mm – less without threading |
| Production speedy (slat package 1 m x 1 m) | 31 sec. | 34 sec. |
| Control panel | 10,4inch colour touch screen | 10,4inch colour touch screen |
| Punching dies setup | automatic | automatic |
| Threading stations setup | automatic | manual |
| Package lifting to higher level | standard | standard |
| Short blinds kit | optional | optional |
| Barcode reader | optional | optional |
| Power supply | 3x400V / 50-60 Hz | 3x400V / 50-60 Hz |
| Installed power | 2,8 kW | 2,2 kW |
| Compressed air | 0,7 MPa | 0,7 MPa |
| Air consumption | 150 L/min. | 150 L/min. |
| Net weight | 440 kg | 395 kg |
| Gross weight | 655 kg | 610 kg |
| Packing – 2 wood boxes (L x W x H) | 1600 mm x 750 mm x 1800 mm | 3650 mm x 800 mm x 1645 mm |
PR-5 hydraulically powered rail-cutting and punching machinery computerized with manual feeding with interchangeable dies.
- Computerized automatic rail cutting and punching machine
- Interchangeable dies make it compatible with most rail systems
- Automatic calculation, only rail width must be entered
- Head and bottom rails punched at the same time
- Equipped with to tools for punching cord lock and tilter holes
- Easy to operate and maintain
- Service and after sale support
- Software for barcode reader
- Side guide hole dies with on/off function
- Slopped blinds application
- Label printer connection
| Cut length | 3000, 4000, 5000 mm |
|---|---|
| Power supply | 3 x 380/415V 50/60 Hz |
| Weight | 780 kg |
Cutting tool MK-007 is used for cutting head rails to desired lengths. Manually operated with a lever.
Can be used for V17 systems.
Cutting tool MK-008 is used for cutting bottom rails to desired lengths. Manually operated with a lever.
Can be used for V17 systems.
Punching tool is used for punching all system holes in head rails (cordlocks, titlers, bearing brackets). The distance of the holes from the edge of the bottom rail is fixed via bumper. Manually operated with a lever.
Can be used for V17 systems. Hole measurements are shown in standards for the given system.
Punching tool MK-010 is used for cutting holes in bottom rails (tape lock button). The distance of the holes is set by the stopper which defines the right valance position allowing punching holes in the preferable distance. Manually operated with a lever.
Can be used for V17 systems. Hole measurements are shown in standards for the given system.
Product specification
Download
