V13 STANDARD

Product description

V13 system, the most universal and well-developed is a venetian blind based on a head rail 25 mm x 25 mm with a possibility of using aluminum slats either 25 mm or 16 mm.. Intended for internal use in free-hanging, integrated or double glazing systems.

Available types of V13 system:

  • Standard – basic version, slat tilting is adjusted with a wand assembled with a tilter, lifting / lowering with cords.
  • Integrated – has additionally a valance used in order to integrate with a window frame; slat tilting is adjusted with a wand assembled with a tilter, lifting / lowering with cords. In order to increase the distance, it is possible to use bracket spacers for decorative slates.
  • Side guiding – the venetian blind has additionally stabilizing cables for lowering and lifting and keeping the slats close to the window pane.
  • Monomagic – this blind is handled with an integrated mechanism monomagic, in which the cords are hidden. They are used for lifting of the venetian blind, while the lowing is automatically done after pulling down the handle. Slats tilting is regulated with circumvolution of the handle attached to monomagic mechanism.

Product photos

Components

Production technology

Punching distance and length scale 1,2 mtr can be used for for cutting H & B rails and for setting distance of punched holes. It works with punching tools for systems V13, V13 wood, V17, V17 wood, V17 Monocomando, V17 Monocmando wood. Cutting tolerance +/-0,5mm.
 Frame made of aluminium. Required joint assembly on the table.

M600 manual slat forming, punching and cutting machine. Modular construction allows to upgrade this machine to fully automatic if needed.

Machine features
  • Forming, cutting and hole punching in aluminium slats
  • Precise setting of slats length and punching stations
  • Standard slat width range: 16, 25, 35 i 50 mm
  • Quick and easy change between aluminium slats widths without using additional tools
Slat width 16, 25, 35, 50 mm
Min. length of cut slats 240 mm
Qty of punching stations 4
Qty of cut off stations 1
Min. distance from slat edge to first hole 70 mm
Net weight 140 kg
Packing – wood crate (L x W x H) 3900 x 500 x 730 mm

M420 is fully automatic slat cutting and punching machine.

Machine features
  • Cutting and punching in one cycle
  • Precise setting of slat length and punching stations
  • Variable speed: 0 – 100 %
  • Standard slat width range : 16, 25, 35, 50 mm, on client’s wish
  • Quick and easy change between aluminium slats widths without using additional tools
  • Automatic qty of slats and hole division calculation
  • Possibility to install threading section
  • Easy to operate and maintain
Additional equipment
  • Side guide hole equipment
  • Barcode reader
  • Spare parts kit
  • Service agreement
Slats width (on client’s order) 16, 25, 35, 50 mm
Slat length 210 mm – 3000 mm
Qty of punching stations 4
Qty of cutting stations 1
Min. distance from slat edge to first hole 70 mm
Max. slat feeding speed 3 m/sec.
Power supply 230V / 50-60 Hz
Installed power 1,4 kW
Net weight 230 kg
Gross weight 480 kg
Packing – wood crate (L x W x H) 4320 x 700 x 1650 mm

M420T is fully automatic slats cutting, punching and threading machine.

Machine features
  • Cutting, punching and threading in one cycle
  • Precise setting of slat length and punching stations
  • Single or double stacking magazines
  • Mechanically disengageable punching dies
  • Variable speed: 0 – 100 %
  • Standard slat width 16, 25, 35, 50 mm
  • Quick and easy change between aluminium slats widths without using additional tools
  • Automatic qty of slats and hole division calculation
  • Easy to operate and maintain
Additional equipment
  • Side guide hole equipment
  • Multi blind cutting station (200 MC – compressed air required (0.6 MPa))
  • Barcode leader
  • Spare parts kit
  • Magazines for woven laddertapes
  • Short blinds kit (200 SB – compressed air required (0.6 MPa))
  • Service agreement
Cutting length 290 mm - 3000 mm (longer optional)
Qty of punching stations 4
Qty of cut off stations 1
Qty of threading stations 5 – 8
Min. distance from slat edge to first hole 75 mm
Max. slat feeding speed 3 m/sec.
Power supply 230V / 50-60 Hz
Installed Power 1,9 kW
Net weight 360 kg
Gross weight 720kg
Packing – wood crate (L x W x H) 4700 x 1120 x 1650 mm

M4000 is fully automatic slats cutting, punching and threading compact machine of 3rd generation.

Machine features
  • Forming, punching, cutting and threading
  • Production with high accuracy
  • Compact machine – less space required
  • All systems of venetian blinds production
  • Numerically controlled length of slats
  • Quick and easy change between aluminium slats widths without using additional tools
  • Quick setup of blinds dimensions
  • Slat coil holder with a constant slat tension
  • Automatic slats number calculation
  • Possibility to set another blind during machine work
  • Diagnostic through service window or Internet modem
  • Continuous readout:
    • Productivity
    • Qty of produced blinds
    • Number of cycles per each die
Machine type M4000 NCS M4000 MS
Number of punching stations 3 3
Number of cutting stations 1 1
Number of threading stations 5-7 5-7
Slat width range 16, 25, 35, 50 mm 16, 25, 35, 50 mm
Min. slat length 300 mm – less without threading 300 mm – less without threading
Max. slat length 3000 mm, 3500 mm, 4000 mm 3000 mm, 3500 mm, 4000 mm
Min. distance from slat edge 80 mm – less without threading 80 mm – less without threading
Production speedy (slat package 1 m x 1 m) 31 sec. 34 sec.
Control panel 10,4inch colour touch screen 10,4inch colour touch screen
Punching dies setup automatic automatic
Threading stations setup automatic manual
Package lifting to higher level standard standard
Short blinds kit optional optional
Barcode reader optional optional
Power supply 3x400V / 50-60 Hz 3x400V / 50-60 Hz
Installed power 2,8 kW 2,2 kW
Compressed air 0,7 MPa 0,7 MPa
Air consumption 150 L/min. 150 L/min.
Net weight 440 kg 395 kg
Gross weight 655 kg 610 kg
Packing – 2 wood boxes (L x W x H) 1600 mm x 750 mm x 1800 mm 3650 mm x 800 mm x 1645 mm

PR-5 hydraulically powered rail-cutting and punching machinery computerized with manual feeding with interchangeable dies.

Machine features
  • Computerized automatic rail cutting and punching machine
  • Interchangeable dies make it compatible with most rail systems
  • Automatic calculation, only rail width must be entered
  • Head and bottom rails punched at the same time
  • Equipped with to tools for punching cord lock and tilter holes
  • Easy to operate and maintain
  • Service and after sale support
Additional equipment
  • Software for barcode reader
  • Side guide hole dies with on/off function
  • Slopped blinds application
  • Label printer connection
Cut length 3000, 4000, 5000 mm
Power supply 3 x 380/415V 50/60 Hz
Weight 780 kg

M450 is an automatic slat cutting and punching machine designed especially for small and medium blinds manufacturers.

Machine features
  • Forming, cutting and hole punching in aluminium slat
  • Precise setting of slat length and punching station positions
  • Variable speed 0-100%
  • Standard slat widths 16, 25 mm
  • Quick and easy change between slats widths without using additional tools
  • Automatic slat counting during production process
  • Modern „touch screen” control panel
Additional equipment
  • Side guide cut off die
  • 25 mm or 16 mmm slat width equipment
  • Warranty and non-warranty service
Slats width 16 mm or 25 mm
Slat length 210 mm – 3000 mm
Number of punching stations 4
Number of cutting stations 1
Min. Distance from slat edge to first hole 70 mm
Max. slat feeding speed 1,7 m/sec.
Power Supply 230 V / 50-60 Hz
Installed Power 0,95 kW
Net weight 190 kg
Gross weight 490 kg
Packing – wood crate (L x W x H) 4140 x 730 x 1630 mm

M3000 is a fully automatic slat cutting, punching and threading machine.

Machine features
  • Forming, cutting and punching holes in aluminium slats 15, 16 or 25 mm wide and threading of venetian
    blinds
  • All systems of venetian blinds production
  • 2 punching stations allowing simultaneous punching of 2 holes
  • Possibility of changing distance for side guiding holes
  • Threading stations – manual setup
  • High precision of blind length and setting of hole distance
  • Automatic lift of produced blinds to a higher level – option
  • Control panel – functions:
    • Quick setup of blinds dimensions, automatic slat number calculation
    • Possibility to set 6 types of blinds, also during machine work
    • Possibility to choose qty and arrangement of holes and ladderstrings
    • Readout of machine performance in m2/h, alu slats usage, qty of produced blinds and qty of cycles per each die
    • Diagnostic through service window or Internet modem
Number of punching stations 2
Number of cutting stations 1
Number of threading stations 4-7
Slat width 15 mm, 16 mm, 25 mm
Min. slat length 300 mm less without threading
Max. slat length 3000 mm
Min. distance from the slat edge to the first hole 90 mm
Machine productivity 65 m2/h
Control panel 5,7inch Monochromatic
Punching stations setup automatic
Threading stations setup manual
Package lifting option
Barcode reader option
Power supply 3x400 V / 50-60 Hz
Installed Power 1,5 kW
Compressed air 0,7 MPa
Air consumption 20 m3/h
Net weight 320 kg
Gross weight 580 kg
Packing – 2 wood boxes (L x W x H) 1250 x 950 x 1730 mm; 3700 x 480 x 950 mm

Punching tool for punching all system holes (tilter, cordlock) in head rails. The distance of the holes is set by the stopper which defines the right valance position allowing punching holes in the preferable distance. Manually operated with a lever.

Can be used for systems V10, V11, V13, BB-25. Hole measurements are shown in standards for the given system.

Punching tool FIX is used for cutting holes in head rails for side-guide cables.. The distance of the holes is set by the stopper which defines the right valance position allowing punching holes in the preferable distance. Manually operated with a lever. Hole measurements are shown in standards for the given system.

Can be used for systems V10, V11, V13, V17, BB-25. Hole measurements are shown in standards for the given system.

Compound die for valance (cutting and punching) used to punch all system hotels in valances. The distance of the holes is set by the stopper which defines the right valance position allowing punching holes in the preferable distance. Manually operated with a lever.

Can be used for systems V10, V13, V13 Wood. Hole measurements are shown in standards for the given system.

Product specification

Access denied Access only for
logged in users

Sales Department

  • Marta Chrobot
    Domestic market specialist
    +48 41 34 00 622
    +48 609 123 492
    marta.chrobot@magnum.com.pl
  • Marta Chrobot
    Domestic market specialist
    +48 41 34 00 622
    +48 609 123 492
    marta.chrobot@magnum.com.pl
  • Marta Chrobot
    Domestic market specialist
    +48 41 34 00 622
    +48 609 123 492
    marta.chrobot@magnum.com.pl
  • Marta Chrobot
    Domestic market specialist
    +48 41 34 00 622
    +48 609 123 492
    marta.chrobot@magnum.com.pl
  • Marta Chrobot
    Domestic market specialist
    +48 41 34 00 622
    +48 609 123 492
    marta.chrobot@magnum.com.pl
  • Marta Chrobot
    Domestic market specialist
    +48 41 34 00 622
    +48 609 123 492
    marta.chrobot@magnum.com.pl
  • Marta Chrobot
    Domestic market specialist
    +48 41 34 00 622
    +48 609 123 492
    marta.chrobot@magnum.com.pl
  • Marta Chrobot
    Domestic market specialist
    +48 41 34 00 622
    +48 609 123 492
    marta.chrobot@magnum.com.pl
  • Jolanta Bagnecka
    Domestic market specialist
    +48 41 34 00 623
    +48 609 507 096
    jolanta.bagnecka@magnum.com.pl
  • Jolanta Bagnecka
    Domestic market specialist
    +48 41 34 00 623
    +48 609 507 096
    jolanta.bagnecka@magnum.com.pl
  • Jolanta Bagnecka
    Domestic market specialist
    +48 41 34 00 623
    +48 609 507 096
    jolanta.bagnecka@magnum.com.pl
  • Jolanta Bagnecka
    Domestic market specialist
    +48 41 34 00 623
    +48 609 507 096
    jolanta.bagnecka@magnum.com.pl
  • Jolanta Bagnecka
    Domestic market specialist
    +48 41 34 00 623
    +48 609 507 096
    jolanta.bagnecka@magnum.com.pl
  • Jolanta Bagnecka
    Domestic market specialist
    +48 41 34 00 623
    +48 609 507 096
    jolanta.bagnecka@magnum.com.pl
  • Jolanta Bagnecka
    Domestic market specialist
    +48 41 34 00 623
    +48 609 507 096
    jolanta.bagnecka@magnum.com.pl
  • Jolanta Bagnecka
    Domestic market specialist
    +48 41 34 00 623
    +48 609 507 096
    jolanta.bagnecka@magnum.com.pl
  • Karolina Kotwica
    Foreign and domestic market specialist
    +48 41 34 00 631
    +48 728 885 279
    karolina.kotwica@magnum.com.pl
  • Karolina Kotwica
    Foreign and domestic market specialist
    +48 41 34 00 631
    +48 728 885 279
    karolina.kotwica@magnum.com.pl
  • Karolina Kotwica
    Foreign and domestic market specialist
    +48 41 34 00 631
    +48 728 885 279
    karolina.kotwica@magnum.com.pl
  • Arkadiusz Olejnik
    Sales representative
    +48 601 898 120
    arkadiusz.olejnik@magnum.com.pl
  • Arkadiusz Olejnik
    Sales representative
    +48 601 898 120
    arkadiusz.olejnik@magnum.com.pl
  • Arkadiusz Olejnik
    Sales representative
    +48 601 898 120
    arkadiusz.olejnik@magnum.com.pl
  • Arkadiusz Olejnik
    Sales representative
    +48 601 898 120
    arkadiusz.olejnik@magnum.com.pl
  • Arkadiusz Olejnik
    Sales representative
    +48 601 898 120
    arkadiusz.olejnik@magnum.com.pl
  • Arkadiusz Olejnik
    Sales representative
    +48 601 898 120
    arkadiusz.olejnik@magnum.com.pl
  • Arkadiusz Olejnik
    Sales representative
    +48 601 898 120
    arkadiusz.olejnik@magnum.com.pl
  • Arkadiusz Olejnik
    Sales representative
    +48 601 898 120
    arkadiusz.olejnik@magnum.com.pl
  • Arkadiusz Olejnik
    Sales representative
    +48 601 898 120
    arkadiusz.olejnik@magnum.com.pl
  • Arkadiusz Olejnik
    Sales representative
    +48 601 898 120
    arkadiusz.olejnik@magnum.com.pl
  • Arkadiusz Olejnik
    Sales representative
    +48 601 898 120
    arkadiusz.olejnik@magnum.com.pl
  • Arkadiusz Olejnik
    Sales representative
    +48 601 898 120
    arkadiusz.olejnik@magnum.com.pl
  • Arkadiusz Olejnik
    Sales representative
    +48 601 898 120
    arkadiusz.olejnik@magnum.com.pl
  • Arkadiusz Olejnik
    Sales representative
    +48 601 898 120
    arkadiusz.olejnik@magnum.com.pl
  • Arkadiusz Olejnik
    Sales representative
    +48 601 898 120
    arkadiusz.olejnik@magnum.com.pl
  • Arkadiusz Olejnik
    Sales representative
    +48 601 898 120
    arkadiusz.olejnik@magnum.com.pl
  • Ready-made products
    +48 662 222 555
    mtm@magnum.com.pl
  • Ready-made products
    +48 662 222 555
    mtm@magnum.com.pl
  • Ready-made products
    +48 662 222 555
    mtm@magnum.com.pl
  • Ready-made products
    +48 662 222 555
    mtm@magnum.com.pl
  • Ready-made products
    +48 662 222 555
    mtm@magnum.com.pl
  • Ready-made products
    +48 662 222 555
    mtm@magnum.com.pl
  • Ready-made products
    +48 662 222 555
    mtm@magnum.com.pl
  • Ready-made products
    +48 662 222 555
    mtm@magnum.com.pl
  • Ready-made products
    +48 662 222 555
    mtm@magnum.com.pl
  • Ready-made products
    +48 662 222 555
    mtm@magnum.com.pl
  • Ready-made products
    +48 662 222 555
    mtm@magnum.com.pl
  • Ready-made products
    +48 662 222 555
    mtm@magnum.com.pl
  • Ready-made products
    +48 662 222 555
    mtm@magnum.com.pl
  • Ready-made products
    +48 662 222 555
    mtm@magnum.com.pl
  • Ready-made products
    +48 662 222 555
    mtm@magnum.com.pl
  • Ready-made products
    +48 662 222 555
    mtm@magnum.com.pl

Export Department

  • Karolina Kotwica
    Foreign and domestic market specialist
    +48 41 34 00 631
    +48 728 885 279
    karolina.kotwica@magnum.com.pl
    PL EN IT
  • Agnieszka Jankowska
    Foreign market specialist
    +48 41 34 00 625
    +48 728 885 267
    agnieszka.jankowska@magnum.com.pl
    PL EN RU
  • Aleksandra Bracichowicz
    Foreign market specialist
    +48 41 34 00 626
    +48 609 507 086
    ola.bracichowicz@magnum.com.pl
    PL EN RU