V17 Wood Standard
Product description
The V17 wood system is a wooden blind based on 50 mm wide wooden slats. It is designed for internal using in a free-hanging system. The wooden blind is operated by cords lifting / lowering , the tilt of the wooden slats is also regulated by the cords with the tilter fixed in the head rail.
- Standard – the basic version with a wood valance
- Side guiding – the venetian blind has additionally stabilizing cables
Production technology
Punching distance and length scale 1,2 mtr can be used for for cutting H / B rails and for setting distance of punched holes. It works with punching tools for systems V13, V13 wood, V17, V17 wood, V17 Monocomando, V17 Monocmando wood. Cutting tolerance +/-0,5mm. Frame made of aluminium. Required joint assembly on the table.
M400RD is a semi-automatic machine for wooden blinds production.
- All holes punched simultaneously
- Slat width range 24-52 mm
- Manual feeding and removing of slats
- Punching stations for side guiding holes
Wood slats width | 25 mm, 35 mm, 50 mm |
---|---|
Max. length of wood slat | 2500 mm |
Number of punching stations | 4 |
Min. distance from slat edge to first hole | 70 mm |
Power supply | 3x400V / 50-60 Hz |
Installed power | 0,75 kW |
Net weight | 160 kg |
Gross weight | 310 kg |
Packing – 1 wood box (H x L x W) | 2750mm x 670mm x 1670mm |
216WAF is a fully automatic machine for production of wooden blinds.
- All holes punched simultaneously
- Adaptable for most wooden or composite slats 24-52 mm wide
- Precise setting of slat length and punching stations position
- Easy to operate and maintain
- Spare punches available
- 216WAF can be upgraded to 216W-219W at later occasion
- Speed control
- Spare parts kit
- Service agreement
Power supply | 3 x 220/240V (50/60 Hz)nlub 3 x 380/415V (50/60 Hz) |
---|---|
Pneumatic equipment requirements | approx. 6 bar at 30 L/min. |
216W-219W is a fully automatic machine for wooden blinds production.
- All holes punched simultaneously
- Adaptable for most wooden or composite slats 24-52 mm wide
- Adaptable for various slat widths and ladder types
- Precise setting of slat length and punching station positions
- Easy to operate and maintain
- Spare punches available
- Magazines for woven laddertapes
- Speed control
- Spare parts kit
- Service agreement
Power supply | 3 x 220/240V (50/60 Hz)nlub 3 x 380/415V (50/60 Hz) |
---|---|
Pneumatic equipment requirements | approx. 6 bar at 30 L/min. |
Punching tool MK-009 is used for punching all system holes in head rails (cordlocks, titlers, bearing brackets). The distance of the holes is set by the stopper which defines the right valance position allowing punching holes in the preferable distance. Manually operated with a lever.
Can be used for systems V17, V17 Wood, V35. V17 Monocomando, V17 Monocomando wood (punching holes only for tape rool set). Hole measurements are shown in standards for the given system.
The photo presents a cutting tool MK-007, a punching tool MK-009 a scale MK-003.