V13 Monomagic
Product description
V13 Monomagic system is a venetian blind based on aluminium slats either 25 mm or 16 mm intended for internal use in a free-hanging or integrated system. The blind is operated by an integrated monomagic mechanism, in which the cords are hidden. They are used for lifting of the venetian blind, while the lowering is automatically done after pulling down the handle slats tilting is regulated by the rotation of the same knob attached to the monomagic mechanism.
Available types of V13 Monomagic system:
- Standard – basic version
- Integrated – has additionally a valance used in order to integrate with a window frame
- Side guiding – the venetian blind has additionally stabilizing cables for lowering and lifting and keeping the slats close to the window pane.
Product photos
Production technology
Compound tool for cutting head / bottom rails, punching holes for bearing brackets in head rails and holes for tape lock buttons in bottom rails. Manually operated with a lever. Can be used for V13 systems.
Hole measurements are shown in standards for the given system.
Punching distance and length scale 1,2 mtr can be used for for cutting H / B rails and for setting distance of punched holes. It works with punching tools for V13 systems. Cutting tolerance +/-0,5mm. Frame made of aluminium. Required joint assembly on the table.
Punching tool for punching all system holes (tilter, cordlock) in head rails. The distance of the holes is set by the stopper which defines the right valance position allowing punching holes in the preferable distance. Manually operated with a lever. Designed for V13 systems.
Dies for cutting and punching holes in a decorative steel slate. The number of holes is determined by the bumper, which is responsible for the correct position of the decorative steel slate, allowing holes to be punched at an appropriate distance.
Tools are manually operated dies that are suitable for V13 systems. The dimensions of the holes are included in the production standards for each system.
M600 manual slat forming, punching and cutting machine. Modular construction allows to upgrade this machine to fully automatic if needed.
- Forming, cutting and hole punching in aluminium slats
- Precise setting of slats length and punching stations
- Standard slat width range: 16, 25, 35 i 50 mm
- Quick and easy change between aluminium slats widths without using additional tools
| Slat width | 16, 25, 35, 50 mm |
|---|---|
| Min. length of cut slats | 240 mm |
| Qty of punching stations | 4 |
| Qty of cut off stations | 1 |
| Min. distance from slat edge to first hole | 70 mm |
| Net weight | 140 kg |
| Packing – wood crate (L x W x H) | 3900 x 500 x 730 mm |
M450 is an automatic slat cutting and punching machine designed especially for small and medium blinds manufacturers.
- Forming, cutting and hole punching in aluminium slat
- Precise setting of slat length and punching station positions
- Variable speed 0-100%
- Standard slat widths 16, 25 mm
- Quick and easy change between slats widths without using additional tools
- Automatic slat counting during production process
- Modern „touch screen” control panel
- Side guide cut off die
- 25 mm or 16 mmm slat width equipment
- Warranty and non-warranty service
| Slats width | 16 mm or 25 mm |
|---|---|
| Slat length | 210 mm – 3000 mm |
| Number of punching stations | 4 |
| Number of cutting stations | 1 |
| Min. Distance from slat edge to first hole | 70 mm |
| Max. slat feeding speed | 1,7 m/sec. |
| Power Supply | 230 V / 50-60 Hz |
| Installed Power | 0,95 kW |
| Net weight | 190 kg |
| Gross weight | 490 kg |
| Packing – wood crate (L x W x H) | 4140 x 730 x 1630 mm |
M420 is fully automatic slat cutting and punching machine.
- Cutting and punching in one cycle
- Precise setting of slat length and punching stations
- Variable speed: 0 – 100 %
- Standard slat width range : 16, 25, 35, 50 mm, on client’s wish
- Quick and easy change between aluminium slats widths without using additional tools
- Automatic qty of slats and hole division calculation
- Possibility to install threading section
- Easy to operate and maintain
- Side guide hole equipment
- Barcode reader
- Spare parts kit
- Service agreement
| Slats width (on client’s order) | 16, 25, 35, 50 mm |
|---|---|
| Slat length | 210 mm – 3000 mm |
| Qty of punching stations | 4 |
| Qty of cutting stations | 1 |
| Min. distance from slat edge to first hole | 70 mm |
| Max. slat feeding speed | 3 m/sec. |
| Power supply | 230V / 50-60 Hz |
| Installed power | 1,4 kW |
| Net weight | 230 kg |
| Gross weight | 480 kg |
| Packing – wood crate (L x W x H) | 4320 x 700 x 1650 mm |
M420T is fully automatic slats cutting, punching and threading machine.
- Cutting, punching and threading in one cycle
- Precise setting of slat length and punching stations
- Single or double stacking magazines
- Mechanically disengageable punching dies
- Variable speed: 0 – 100 %
- Standard slat width 16, 25, 35, 50 mm
- Quick and easy change between aluminium slats widths without using additional tools
- Automatic qty of slats and hole division calculation
- Easy to operate and maintain
- Side guide hole equipment
- Multi blind cutting station (200 MC – compressed air required (0.6 MPa))
- Barcode leader
- Spare parts kit
- Magazines for woven laddertapes
- Short blinds kit (200 SB – compressed air required (0.6 MPa))
- Service agreement
| Cutting length | 290 mm - 3000 mm (longer optional) |
|---|---|
| Qty of punching stations | 4 |
| Qty of cut off stations | 1 |
| Qty of threading stations | 5 – 8 |
| Min. distance from slat edge to first hole | 75 mm |
| Max. slat feeding speed | 3 m/sec. |
| Power supply | 230V / 50-60 Hz |
| Installed Power | 1,9 kW |
| Net weight | 360 kg |
| Gross weight | 720kg |
| Packing – wood crate (L x W x H) | 4700 x 1120 x 1650 mm |
M3000 is a fully automatic slat cutting, punching and threading machine.
- Forming, cutting and punching holes in aluminium slats 15, 16 or 25 mm wide and threading of venetian
blinds - All systems of venetian blinds production
- 2 punching stations allowing simultaneous punching of 2 holes
- Possibility of changing distance for side guiding holes
- Threading stations – manual setup
- High precision of blind length and setting of hole distance
- Automatic lift of produced blinds to a higher level – option
- Control panel – functions:
- Quick setup of blinds dimensions, automatic slat number calculation
- Possibility to set 6 types of blinds, also during machine work
- Possibility to choose qty and arrangement of holes and ladderstrings
- Readout of machine performance in m2/h, alu slats usage, qty of produced blinds and qty of cycles per each die
- Diagnostic through service window or Internet modem
| Number of punching stations | 2 |
|---|---|
| Number of cutting stations | 1 |
| Number of threading stations | 4-7 |
| Slat width | 15 mm, 16 mm, 25 mm |
| Min. slat length | 300 mm less without threading |
| Max. slat length | 3000 mm |
| Min. distance from the slat edge to the first hole | 90 mm |
| Machine productivity | 65 m2/h |
| Control panel | 5,7inch Monochromatic |
| Punching stations setup | automatic |
| Threading stations setup | manual |
| Package lifting | option |
| Barcode reader | option |
| Power supply | 3x400 V / 50-60 Hz |
| Installed Power | 1,5 kW |
| Compressed air | 0,7 MPa |
| Air consumption | 20 m3/h |
| Net weight | 320 kg |
| Gross weight | 580 kg |
| Packing – 2 wood boxes (L x W x H) | 1250 x 950 x 1730 mm; 3700 x 480 x 950 mm |
M4000 is fully automatic slats cutting, punching and threading compact machine of 3rd generation.
- Forming, punching, cutting and threading
- Production with high accuracy
- Compact machine – less space required
- All systems of venetian blinds production
- Numerically controlled length of slats
- Quick and easy change between aluminium slats widths without using additional tools
- Quick setup of blinds dimensions
- Slat coil holder with a constant slat tension
- Automatic slats number calculation
- Possibility to set another blind during machine work
- Diagnostic through service window or Internet modem
- Continuous readout:
- Productivity
- Qty of produced blinds
- Number of cycles per each die
| Machine type | M4000 NCS | M4000 MS |
|---|---|---|
| Number of punching stations | 3 | 3 |
| Number of cutting stations | 1 | 1 |
| Number of threading stations | 5-7 | 5-7 |
| Slat width range | 16, 25, 35, 50 mm | 16, 25, 35, 50 mm |
| Min. slat length | 300 mm – less without threading | 300 mm – less without threading |
| Max. slat length | 3000 mm, 3500 mm, 4000 mm | 3000 mm, 3500 mm, 4000 mm |
| Min. distance from slat edge | 80 mm – less without threading | 80 mm – less without threading |
| Production speedy (slat package 1 m x 1 m) | 31 sec. | 34 sec. |
| Control panel | 10,4inch colour touch screen | 10,4inch colour touch screen |
| Punching dies setup | automatic | automatic |
| Threading stations setup | automatic | manual |
| Package lifting to higher level | standard | standard |
| Short blinds kit | optional | optional |
| Barcode reader | optional | optional |
| Power supply | 3x400V / 50-60 Hz | 3x400V / 50-60 Hz |
| Installed power | 2,8 kW | 2,2 kW |
| Compressed air | 0,7 MPa | 0,7 MPa |
| Air consumption | 150 L/min. | 150 L/min. |
| Net weight | 440 kg | 395 kg |
| Gross weight | 655 kg | 610 kg |
| Packing – 2 wood boxes (L x W x H) | 1600 mm x 750 mm x 1800 mm | 3650 mm x 800 mm x 1645 mm |
PR-5 hydraulically powered rail-cutting and punching machinery computerized with manual feeding with interchangeable dies.
- Computerized automatic rail cutting and punching machine
- Interchangeable dies make it compatible with most rail systems
- Automatic calculation, only rail width must be entered
- Head and bottom rails punched at the same time
- Equipped with to tools for punching cord lock and tilter holes
- Easy to operate and maintain
- Service and after sale support
- Software for barcode reader
- Side guide hole dies with on/off function
- Slopped blinds application
- Label printer connection
| Cut length | 3000, 4000, 5000 mm |
|---|---|
| Power supply | 3 x 380/415V 50/60 Hz |
| Weight | 780 kg |
Product specification
Download
